What's new

Latest resources

IndiWork HD-Link IW06B-N23 Install Manual Boorda
IW06B-N23 Digital Multimedia Interface For BMW (NBT [CIC-High], LVDS 6PIN)
0.00 star(s) 0 ratings
Downloads
6
Updated
IndiWork HD-Link IW04B-N Install Manual Boorda
IW04B-N Digital Multimedia Interface For BMW (CIC, LVDS 4PIN)
0.00 star(s) 0 ratings
Downloads
11
Updated
Car Information Computer (CIC) Boorda
0.00 star(s) 0 ratings
Downloads
28
Updated
Changing the Vehicle Order Boorda
0.00 star(s) 0 ratings
Downloads
32
Updated
System Services Reference Boorda
System Services Reference QNX CAR™ Platform for Infotainment 2.1
QNX Development
0.00 star(s) 0 ratings
Downloads
14
Updated
QNX Runtime for APK Users Guide Boorda
0.00 star(s) 0 ratings
Downloads
11
Updated
Qt Development Environment Boorda
Qt Development Environment QNX CAR™ Platform for Infotainment 2.1
QNX Development
0.00 star(s) 0 ratings
Downloads
9
Updated
QNX CAR™ User's Guide Boorda
QNX CAR™ User's Guide QNX CAR™ Platform for Infotainment 2.1
QNX CAR™
0.00 star(s) 0 ratings
Downloads
9
Updated
QNX CAR Multimedia Architecture Guide Boorda
QNX CAR Multimedia Architecture Guide QNX CAR™ Platform for Infotainment 2.1
QNX Dev - QNX CAR Multimedia Architecture Guide
0.00 star(s) 0 ratings
Downloads
10
Updated
Architecture Guide Boorda
Architecture Guide QNX CAR™ Platform for Infotainment 2.1
QNX Dev - Architecture Guide
0.00 star(s) 0 ratings
Downloads
6
Updated

Latest profile posts

Hello, when you have the time to reply I’m hoping you could help me out!

I will be running JB4; I want to start running meth, is the BMS one better just due to the integrity?
I’ve been looking on the BMS website, but I can’t seem to find a suitable tank for a 335 in the boot?

With JB4 and the meth kit, is it going to be relatively easy to have MHD as well,

thanks once again,
Hi Terry, just a quick one, looking to use your N54 manifold with my existing PI spacer so I can run PI fuel and meth(to allow me to ditch CPM). Have you run it with a spacer? If so which way round works best? Meth in spacer or fuel?

Regards

Jason.
New member! I got an n54 07’335i
And I’m hoping you guys know about a rattle on the deceleration.. only on the startup when the engines warmed up it goes away.. I’m hoping it’s not the wastegate or valvetrain please reply if you know of this noise ty
  • 1Like
Reactions: doublespaces
07N54noob
07N54noob
Also I got money saved up for major upgrades if y’all can drop me some tips on what intake/exhaust/chip/ hpfp or alternative/injectors/ single turbo or what??what else should I do?? Accepting any advice thanks for your time!
doublespaces
doublespaces
Feel free to post a thread in the Troubleshooting section inside the N54 forum and someone should be able to check it out :)
Bmwfixerguy1
Bmwfixerguy1
Yes that noise you described on start up and on decel is most likely wastegate rattle. Very common and exactly how you described. Sorry bud definitely time for turbos 😔
Top